About 500sf Circular sawn hay loft hard pine flooring. This flooring is rather clean and has been nicely burnished from the bales of hay being moved around on it over the years. Widths of approximately 4”-10”+/- and length of approximately 4’-10’ plus some shorts. The floor has been washed and would be great as a [...]
375sf of original surface, proud 1” thick, antique chestnut flooring with a reddish-brown wash on one section and another section that has just a few spots of paint. Widths of 7” to 15” and most lengths of 14.5’ to 15’ long, plus some shorts. As with all my floors, boards will need to be edged [...]
260sf of early 19C., wide plank, circular sawn oak. Many are just under 12’ long and about 15% shorts (26”). Widths approximately 6” to 16” and lengths from 9’6” to 11’9” plus the shorts. About 210sf are 9’6” and 11’9”. Nominally 7/8” to 1” thick. Perfect for buffing to smooth high points of saw marks [...]
~500sf of wide plank, antique painted and mostly unpainted white pine flooring and wall board. This is ‘sand grade’ material and will be a nice, sanded white pine floor once finished. Widths of ~ 6” to 16”+/- and lengths of 6' to 16’+, plus some shorts and extra material at no charge. As with all [...]
250sf of mostly clear, red oak with a thin, tight layer of early bluish-green paint. Flooring has few nail holes in surface as flooring was ship-lapped and much of it was edge nailed. Most pictures are in place with some demolition debris. One photo of underside shows grain and very few knots. Widths of 8”-12” [...]
Spectacular 1,400sf+ of original surface, foot worn, numbered, wide, long, antique Eastern White pine flooring. A fabulous find and a long time in the making. This came from the Chichester, NH meeting house which dates to the 1770’s, but I think the original floor wore out and this floor was put in during the mid-1800’s. [...]
150sf of 18C, ship-lapped, original surface, painted, antique white pine. Widths of ~10” to 16” and lengths of ~14’ to 16’. The flooring could be used ‘as is’ or painted. Because of the condition of the original surface, this floor should not be sanded. The original surface contours would show through the paint. As with [...]
590sf of long, wide and thick, hand planed and foot worn 18C Red Pine flooring from South Windsor, CT and a similar thickness batch from MA. The flooring is a proud 1”+/- and very heavy and dense. The flooring should be sanded and buffed to bring out the great Red Pine colors. Widths of 7” [...]
