Updated May 5, 2025

Art & Garden Antiques

Some of my favorite antique pieces, other than salvaged wood, have been garden ornaments, such as carved stone sculptures, cast iron statues, vintage granite grindstones or millstones, stone capitals, antique stone sinks, and other items for landscape design and architecture.  I am drawn to these pieces because of their age, patina and the time it has taken for nature to enhance these beautiful forms, where the main purpose is to please the eye.  Many items here are ideal landscape décor but some are antiques appropriate for your indoor spaces. Contact me with any questions.

New Set of #16 Matching Granite Posts

A rare find of sixteen, matching pyramid top, granite posts. Each is 66” average overall length with 36” finished and 30” below ground. Most have two holes on opposite sides for bars. The holes are 16” on-center apart.

Cost: (post #16) #16 @ $750 each, whole batch only, $12,000.

Added March 18, 2025

Click for More

Sold 18C Granite Entry Stone #25

Fantastic early entry stone from Epsom, NH.  ~7’4” long x 23” wide x 7” tall (edges) with ‘belly’ (not flat on bottom).  Perfect for a large door entry stone or could be used lengthwise as part of a walkway or in concert with ‘granite walkway stones’. Great tooling and lichen growth on top and 3 faces.

Cost: (Stone #25) SOLD

Added November 3, 2024

Click for More

Antique Iron Fence ‘Corners’

These 4 matching 90-degree iron fence corners are 38” tall when set on ground and each side measures approximately 45.5” from corner.  Great for a small garden area or garden ornamentation.  Can be made larger using stone posts in-between iron corners.

Cost: All four corners: $400.

Added June 8, 2024

Click for More

Large Cast Iron Grain Mill Drive Pulleys

Cast iron, 19C, water driven drive pulleys.  Great for lawn ‘art’ or round table (use large one as base and smaller as top).  Very heavy.  One is 42” in diameter x 7.5” thick and the other (blue) is 39.5” in diameter and 5&1/8” thick.

Cost: Pair $250

Added June 8, 2024

Click for More

Wooden Grain Augers PA Mill

Wooden grain augers from a grain mill in PA c.1775. Great as ‘art’ or for lights hanging from it over a dining table or island or bar!  Not sure of age, but most likely 19th C.  Iron couplings and wood. 5.5” diameter octagon, 10” in diameter with paddles x 65” long.

Cost: (augers) seven for $750 (whole batch only)

Added June 8, 2024

Click for More

Granite Walkway Stones

#4 beautiful, wire cut, sidewalk stones, plus #2 matching steps. 

Cost: (Granite Walkway Stones #1) $2,800

Added March 5, 2024

Click for More

First Period Gate Legged Table

Table is made from black walnut and dates to between 1690 to 1720.  It was purchased in 1919 by a private party from the dining room in a 17Th century, colonial museum, Danbury, CT.  Picture of document shows the table in the Danbury Colonial Museum.

Cost: $350

Added July 3, 2023

Click for More

Large Cast Iron Rooster

Vintage cast iron rooster with great patina.  Perfect for the lawn or garden.  44” tall and very heavy – hundreds of pounds. Very handsome!

Cost: $3,500

Added November 6, 2021

Click for More

Carved Limestone Lions c.1870

Fantastic pair of carved limestone lions c.1870.  Came from the garden of the de Kay Estate on 1 George Cannon Rd, Tyringham, MA.  Visited often by Mark Twain and Jackson Pollock among others, and where the Guilded Age was coined. 

Cost: $9,500

Added November 6, 2021

Click for More

Granite Capital Garden Ornament

Interesting architectural stone. Would make a great garden ornament. Measures approximately 16” in diameter and 16” tall, approximately 22” diameter at base.

Cost: $250

Added May 5, 2021

Click for More

Granite Grind Stone #1

This stone would have rolled around the top of a grindstone like a wheel, often pulled by a donkey, crushing grain as it rolled. It is approximately 18” tall and 18” in diameter. It has a ‘star’ carved into each end. It weighs approximately 450 lbs.

Cost: $350

Added May 5, 2021

Click for More

17th Century Wooden Bust or Figure Head

This carved wooden bust or figurehead came from England and is dated between c.1650 to c.1680. It is a rough carving with the rasp marks very visible. It measures 20” tall x 10” wide at shoulders x 6.5” wide at lower chest. A unique and very old one-of-a-kind.

Cost: $8,500

Added March 31, 2021

Click for More