~500sf of wide plank, antique painted and mostly unpainted white pine flooring and wall board. This is ‘sand grade’ material and will be a nice, sanded white pine floor once finished. Widths of ~ 6” to 16”+/- and lengths of 6' to 16’+, plus some shorts and extra material at no charge. As with all [...]
250sf of mostly clear, red oak with a thin, tight layer of early bluish-green paint. Flooring has few nail holes in surface as flooring was ship-lapped and much of it was edge nailed. Most pictures are in place with some demolition debris. One photo of underside shows grain and very few knots. Widths of 8”-12” [...]
3”x7” sawn pine joists of varying lengths plus some smaller and larger dimension beams. Cost: (sawn joists) SOLD
#3-38’x7”x7” hewn beams from same house. 38'ers have regularly space joist and primary joist notches. Very good condition. Cost: (Hewn Pine Beams) #3-38' beams SOLD
Fantastic early entry stone from Epsom, NH. ~7’4” long x 23” wide x 7” tall (edges) with ‘belly’ (not flat on bottom). Perfect for a large door entry stone or could be used lengthwise as part of a walkway or in concert with ‘granite walkway stones’. Great tooling and lichen growth on top and 3 [...]
Spectacular 1,400sf+ of original surface, foot worn, numbered, wide, long, antique Eastern White pine flooring. A fabulous find and a long time in the making. This came from the Chichester, NH meeting house which dates to the 1770’s, but I think the original floor wore out and this floor was put in during the mid-1800’s. [...]
150sf of 18C, ship-lapped, original surface, painted, antique white pine. Widths of ~10” to 16” and lengths of ~14’ to 16’. The flooring could be used ‘as is’ or painted. Because of the condition of the original surface, this floor should not be sanded. The original surface contours would show through the paint. As with [...]
160sf of 5/4”, splined, antique, painted and foot worn white pine. Perfect for a wine cellar or loft needing thick flooring. Widths of 6” to 10” +/- and lengths of 5’ to 12’ +/-. As with all my floors, this flooring will need to have the edges and ends trimmed during installation. Cost (batch [...]
Stair tread stock. #22 pieces of a mix of pines from a barn in NH. They measure 2” x 11.5” x 6’+/-. They are rough sawn and could be dressed for ‘open’ treads of a thickness very close to 2”. The 2" tread stock has the tight paint on one side. Cost: (batch #91) #22 [...]
~#50 peices salvaged #1 Fir 2x8’s from a barn built about 1950. Actual dimensions ~1&5/8” thick x 7.5”+/- wide x ~12’-14’+/- long. The material is very true and dry. Stamped: No. 1 from West Coast Mill #49! Cost: (batch #90) SOLD
