1600sf+ of circular sawn hay loft flooring. This flooring is rather clean and has been nicely burnished from the bales of hay being moved around on it over the years. Widths of approximately 6”-14”+/- and length of approximately 8’-12’ plus about 30% short from 2’ to 5’. The floor is quite clean and with a [...]
Single, hand planed, wide white pine board for wall or flooring repair. 17.5” wide (measured in middle, board tapers) x 11’6” long x 7/8” thick. Cost: (batch #316) 16.5sf SOLD
420sf of 2” thick (840 bf) antique pine barn flooring. Split into two offerings. Great surface from farm use. Most is 6’-7’ long and about 30% is 11’ long +/-. A few 6’ers have solid, light green paint. Great for a loft. Widths of 9”-12”=/- and length of 6’ to 11’+/-. Long ones and some [...]
400sf of fantastic chestnut siding from the North side of a PA barn. Great condition and quality. Chestnut ages much better than other wood used for siding. It could be used ‘as is’ or ‘brushed’ with a nylon brush for a textured wall application or lightly brushed/buffed for a great, rustic chestnut floor. Average widths [...]
This caliper is in great condition. Easily moves and has all it’s original parts. It is also signed by maker: T. O’Brien. Fine file marks can be seen all over the surface and very little pitting, if any. No damage that I can see. Very high quality. Used and stored very carefully. It measures 8” [...]
1,500sf+ of vintage veneer, measured conservatively. Approximately 20 different species, most in large number of consecutive slices. Approximately 60 years old. It was made by J.A. Habig veneer company, Montgomery, PA and sold through Mainesburg Lumber Company, PA. I was only able to identify about 10 of them. Some names printed on veneer don’t come [...]
200sf of foot worn smooth, CT red pine that could be used ‘as is’. Widths from approximately 8” to 10” +/- and lengths of mostly 15’ (Very long!). Thickness of approximately 5/8” to ¾” +/-. Would be best for a 13’ wide x 14’ long room. The flooring is relatively clean but has not been [...]
This is a restored spring latch with polished brass knobs and includes a period style keeper and new screws that have had the zinc ground off and head colored to blend in. It measures 4” x 4” and has a very attractive, deep tapered bar. Cost: (spring latch #1) SOLD
Unique, LH, hand forged open face spring loaded keeper. Keeper slides down as bar hits it and springs back up to secure bar. This is the first one I have seen in over 30 years. It measures 2.5” tall x 4” wide. Keeper sticks out from door jamb 1&3/4”. Great look, restored and in working [...]
#23 roughly similar spade and arrow head type, through the cusp, 18C., interior thumb latches. EXCLUDES thumb latch in TOP RIGHT (It is latch #8, signed and in excellent condition). All have thumbs and in various condition, but all are good, some excellent. At least one is signed. Cost: (latch batch #9) SOLD [...]
