3”x7” sawn pine joists of varying lengths plus some smaller and larger dimension beams. Cost: (sawn joists) SOLD

#3-38’x7”x7” hewn beams from same house. 38'ers have regularly space joist and primary joist notches.  Very good condition. Cost: (Hewn Pine Beams) #3-38' beams SOLD

Stair tread stock. #22 pieces of a mix of pines from a barn in NH. They measure 2” x 11.5” x 6’+/-.  They are rough sawn and could be dressed for ‘open’ treads of a thickness very close to 2”.   The 2" tread stock has the tight paint on one side. Cost: (batch #91) #22 [...]

~#50 peices salvaged #1 Fir 2x8’s from a barn built about 1950.  Actual dimensions ~1&5/8” thick x 7.5”+/- wide x ~12’-14’+/- long.  The material is very true and dry.  Stamped: No. 1 from West Coast Mill #49! Cost: (batch #90) SOLD

Resawn antique chestnut from a large barn beam.  Will make a tabletop measuring 42”+ wide x 9’10” long.  Boards are 1” thick in the rough.  #2 – 10” boards and #2 – 12” boards, book matched. Cost: (stock #82) SOLD

100sf of hand planed Red Pine wall boards from PA. (*the painted boards-blue and white, and the two white pine boards have been removed and tally adjusted)  These boards are very nice quality with prominent hand planing.  Most are unpainted with a wonderful patina with the exception of the red wash on a few.  This [...]

18C gunstock posts salvaged from and early 18C Northwood, NH cape. #5 posts are in great condition, including original tenons (multiple on top of posts).  Two gunstock posts had about 16” +/- cut from bottom. They can be repaired.  Two posts had ¼ of vertical post corner removed for plaster and lath long ago. The [...]

400sf of fantastic chestnut siding from the North side of a PA barn.  Great condition and quality. Chestnut ages much better than other wood used for siding. It could be used ‘as is’ or ‘brushed’ with a nylon brush for a textured wall application or lightly brushed/buffed for a great, rustic chestnut floor. Average widths [...]