Salvaged & Reclaimed Antique Woodsupport@billrose.net2024-11-30T13:42:39+00:00

antique_flooring

Antique Flooring

antique_hardware

Antique Hardware

Salvaged Wood

art-garden-category-thumb

Art & Garden Antiques

Updated November 30, 2024

Salvaged & Reclaimed Wood

In addition to specializing in antique wood flooring, we supply vintage recycled building materials, mainly in chestnut, oak and pine. Antique beams, boards, joists, etc. can be used for either decorative or structural purposes, such as cathedral ceilings, trim or molding, tables or counter tops. We have a variety of salvaged antique wood in stock, including wallboard and wainscot. We also have a small inventory of exotic wood, which can be used for furniture, musical instruments and other woodworking projects. Occasionally, we offer reclaimed, new wood for reproduction applications (usually extremely wide boards or with other special properties). Please contact us to discuss your needs.

New Sawn Joists, Most 3″x7″, various lengths and sizes

3”x7” sawn pine joists of varying lengths plus some smaller and larger dimension beams.

Cost: (sawn joists) $1000, whole batch only.

Added: November 3, 2024

New #5-22′ Antique Oak Beams

#5-22’x 8”x9.5” circular sawn oak beams with few mortices. Need to be cleaned up.

Cost: (Oak beams) #5 beams, $3,300. Anything less than all five beams, $40 lf. Full lengths only.

Added: November 3, 2024

New 28′ & 38′ Hewn Beams From Early NH House

#3-28’x7”x7” hewn beams from early Northwood, NH House. Only a few notches in each. #3-38’x7”x7” hewn beams from same house. Very good condition.

Cost: (Hewn Pine Beams) # 6 beams, $4,000. Anything less than all 6 beams, $25 lf. Full lengths only.

Added: November 3, 2024

New 2″ Thick Antique Pine Stair Tread Stock

Stair tread stock. #22 pieces of a mix of pines from a barn in NH. They measure 2” x 11.5” x 6’+/-. They are rough sawn and could be dressed for ‘open’ treads of a thickness very close to 2”. (Along with the purchase of these, there is a bonus of #10 pieces that measure ~1.5”x 9”x 6’+/-).

Cost: (batch #91) #22 treads @ $100 each, whole batch only, $2,200.

Added: August 25, 2024

New 50+ year old No. 1 Fir 2×8’s from the West Coast

~#100 salvaged 2x8’s from a barn built about 1950 or so. The Doug Fir 2x8’s (actual dimensions ~1&5/8” thick x 7.5”+/- wide x ~12’-14’+/- long. The material is very true and dry. It is also No. 1 from West Coast Mill #49! We just don’t have many trees that will produce such high-quality stock today.

Cost: (batch #90) ~#100 pieces @ $25/joist (at least 1,200 linear feet), whole batch only, $2,500.

Added: August 24, 2024

Hand Planed, Painted White, Antique White Pine Wall Boards

120sf of hand planed painted horizontal wallboard. Widths of ~10” to 15” and lengths of ~9.5’ to 15.5’ and ~3/4” thick. Great as a repainted wall with old hand planing showing through.

Cost: (batch #89) 120sf @ $20sf, whole batch only, $2,400.

Added: July 1, 2024

Hand Planed, Red Washed, Antique White Pine Wall Boards

125sf of red washed, hand planed, antique wallboard and closet material. Widths of 9” to 19” and lengths of 7’ to 8’.

Cost: (batch #88) 125sf @ $25sf, whole batch only, $3,125.

Added: June 8, 2024

Unpainted, Hand Planed, Original Surface, Antique White Pine Wall Boards

60sf of beautiful, unpainted, hand planed, 18C white pine wallboard. Widths of 10” to 19” and lengths of 7’ to 7’10” tall. High quality for small area. Could be used with wallboard batch #73.

Cost: (batch #87) 60sf @ $30sf, whole batch only, $1,800.

Added: June 8, 2024

Horizontal, Hand Planed, Off-White, Antique White Pine Wall Boards

225sf of horizontal ‘off’ white antique white pine wallboard from a single source. Widths of ~9” to 16” and lengths of ~4’ to 14’+.

Cost: (batch #86) 225sf @ $20sf, whole batch only, $4,500.

Added: June 8, 2024

PA Mill: coming this year

This is a huge mill in PA. No chemicals, no oil, no animal waste. The perfect situation. Not only is it a once in a career find, but the sheer volume of great material is also endless. Primary species are Chestnut and White Pine, and then miscellaneous hard and soft woods. Also, a stone foundation from original 18C mill.

Cost: Prices TBD.

Added: March 28, 2024

On Hold 18C Hewn Beams from Early NH cape

Beams from 18C Cape in NH where gunstocks came from. Great selection of beams for mantles, Summer beams and decorative ceiling beams. Most singles, but two are a pair because same size and look. Beams up to 20’ long for summers and great mantle stock.

Cost: (beams): #1 - $600, #2 - SOLD, #3 - SOLD, #4 & 5 - $1,200 for pair, #6 - SOLD (summer), #7 - SOLD, #8 - SOLD (mantle beam)

Added: March 28, 2024

18C Gunstock Posts

18C gunstock posts salvaged from and early 18C Northwood, NH cape. #5 posts are in great condition, including original tenons (multiple on top of posts).

Cost: (Gunstocks) #9 posts, whole lot only, $5,250.

Added: March 28, 2024

Red Chestnut Barn Siding from PA

400sf of fantastic chestnut siding from the North side of a PA barn. Great condition and quality. Chestnut ages much better than other wood used for siding. It could be used ‘as is’ or ‘brushed’ with a nylon brush for a textured wall application or lightly brushed/buffed for a great, rusting chestnut floor. Average widths of approximately 10”-12”+/- and most lengths of approximately 15’. A rare find.

Cost: (red chestnut siding) 400sf @ $25sf, whole batch only, $10,000.

Added: March 28, 2024

Northwood, NH, 18C Cape Roof System

Northwood, NH purlin roof system: this is a white pine (most likely) roof system with ‘ladder rung’ style purlins that connect the rafters, so roofers would lie vertically vs. horizontally (roofers not included). Typical of Northern New England. Numbered. It would be perfect for a ‘great room’ ceiling. Its footprint is 30’x40’ and it is the roof of an 18C cape. Hewn, tapered rafters are approximately 18’ long and taper from approximately 6”x10” at base and ~ 6”x6” at peak.

Cost: (Northwood) $18,500

Added: March 5, 2024

SALE! Huge Batch of Vintage Veneers

1,500sf+ of vintage veneer, measured conservatively. Approximately 20 different species, most in large number of consecutive slices. I was only able to identify about 10 of them. Some names printed on veneer don’t come up on internet. Lots of pictures to show what is there, but not all inclusive. This is not what I usually deal in, so I now just want to sell it all in one batch for an inexpensive price.

Cost: (veneer batch-all) 1500sf @ $1,200.

Added: August 30, 2023

Blue Interior Door #2

Fantastic 18C., rare 3-panel, right-hand door with the works…a wonderful period blue-gray color and great original hardware. A very handsome door. Wood is all hand planed and about 80% hand scraped with a razor blade to reveal the original color.

Cost: (door #2) $1,200.

Added: June 17, 2023

Chestnut Tabletop Stock #82

Resawn antique chestnut from a large barn beam. Will make a tabletop measuring 42”+ wide x 9’10” long. Boards are 1” thick in the rough. #2 – 10” boards and #2 – 12” boards, book matched.

Cost: (stock #82) 36sf @ $30sf, whole batch only, $1080.

Added: June 3, 2023

Hand Planed, Wide, Red Pine Wall Board

100sf of hand planed Red Pine wall boards from PA. (*the painted boards-blue and white, and the two white pine boards have been removed and tally adjusted) These boards are very nice quality with prominent hand planing. Most are unpainted with a wonderful patina with the exception of the red wash on a few.

Cost: (batch #73) 100sf @ $25sf, whole batch only, $2,500.

Added: April 4, 2023

Wide Hand Planed Wall Board From PA

50sf of hand planed Eastern white pine from PA with a great patina. This is a run of 8.5 linear feet of 6’4” tall boards. Widths of approximately 7” to 15” and a length of 6’4”. Boards are a heavy 1” thick. Great for a wall treatment or furniture.

Cost: (batch #62) 50sf @ $12.50sf, whole batch only, $625.

Added: May 8, 2022

Sold Wide Feather Edge Wall Board

Small section, 40sf, of early, wide feather edge wall boards. Hand planed. Widths of 14” to 18”+ x 7’3” tall. Good candidate for painting.

Cost: (wall board #59) SOLD

Added: November 29, 2021

Van Wyck 1735 Corner Cupboard

This early built-in corner cupboard, c.1735, was recently salvaged from the Van Wyck House parlor in Lloyd Harbor, NY.

Cost: $12,500

Added: April 1, 2021

Sold Wide plank single board Tulip wood

Huge, single board that was an early country store counter. This counter top is made of Poplar or Tulip wood. It measures 28” wide x 99” long x 1” thick and the front corners are rounded.

Cost: (tabletop stock #2) SOLD

Added: March 10, 2021