38′ Hewn Beams From Early NH House
#3-38’x7”x7” hewn beams from same house. 38'ers have regularly space joist and primary joist notches. Very good condition. Cost: (Hewn Pine Beams) #3-38' beams SOLD
#3-38’x7”x7” hewn beams from same house. 38'ers have regularly space joist and primary joist notches. Very good condition. Cost: (Hewn Pine Beams) #3-38' beams SOLD
Fantastic early entry stone from Epsom, NH. ~7’4” long x 23” wide x 7” tall (edges) with ‘belly’ (not flat on bottom). Perfect for a large door entry stone or could be used lengthwise as part of a walkway or in concert with ‘granite walkway stones’. Great tooling and lichen growth on top and 3 [...]
Spectacular 1,400sf+ of original surface, foot worn, numbered, wide, long, antique Eastern White pine flooring. A fabulous find and a long time in the making. This came from the Chichester, NH meeting house which dates to the 1770’s, but I think the original floor wore out and this floor was put in during the mid-1800’s. [...]
150sf of 18C, ship-lapped, original surface, painted, antique white pine. Widths of ~10” to 16” and lengths of ~14’ to 16’. The flooring could be used ‘as is’ or painted. Because of the condition of the original surface, this floor should not be sanded. The original surface contours would show through the paint. As with [...]
160sf of 5/4”, splined, antique, painted and foot worn white pine. Perfect for a wine cellar or loft needing thick flooring. Widths of 6” to 10” +/- and lengths of 5’ to 12’ +/-. As with all my floors, this flooring will need to have the edges and ends trimmed during installation. Cost (batch [...]
Stair tread stock. #22 pieces of a mix of pines from a barn in NH. They measure 2” x 11.5” x 6’+/-. They are rough sawn and could be dressed for ‘open’ treads of a thickness very close to 2”. The 2" tread stock has the tight paint on one side. Cost: (batch #91) #22 [...]
~#50 peices salvaged #1 Fir 2x8’s from a barn built about 1950. Actual dimensions ~1&5/8” thick x 7.5”+/- wide x ~12’-14’+/- long. The material is very true and dry. Stamped: No. 1 from West Coast Mill #49! Cost: (batch #90) SOLD
450sf+ of super wide, hand-planed and foot worn, antique Red Pine (aka Northern Hard Pine). Native to New England, it is a very heavy and dense wood and tight grain. It is often mixed with White Pine in old houses because they can look very similar. This is an assembled batch from different houses. It [...]
700sf of hand planed, butt edged, antique Hemlock flooring. This material is very nice quality, and the original surface is smooth enough for most people to use ‘as is’ without sanding or even a finish if desired. The Hemlock is much harder and denser than White Pine. The hand-planed surface is visible with boards lightly [...]
350sf of wide, high quality, sand-grade white pine. This material was too wide and too nice to put into the lower prices sand-grade batch…but it could be added to it if needed. Most of the material is unpainted and quite wide. It will make a nice sanded antique floor. Widths of ~10” -18”+/- and lengths [...]