Updated January 1, 2026
Reclaimed Antique Wood Flooring
Some of the original surface antique flooring we sell was hand-planed and then foot worn over hundreds of years. These wide plank floors are smooth enough to install without sanding and are perfect for someone who wants an authentic 200 to 300 year old floor. Other vintage reclaimed floors have saw marks and should be screened or sanded once installed. The reclaimed antique flooring for sale below is available only as complete batches. You should plan on 10 – 20% waste. Contact me with your flooring needs and we can find an old floor that’s right for you.
Learn why historic flooring is so valuable. Also, this recent article in CT Old House Online offers insight into the challenges and rewards of reclaimed flooring.
Need help with installation? See our guidelines and tips for installing your original antique wood floor.
New Premium, Vintage Red Pine
675sf of premium Red (hard) Pine from PA. This floor is very dense and has a wonderful foot worn surface.Cost: (batch #449) 675sf @ $40sf, whole batch only, $27,000.
Click for More
New Super Wide, Vintage Oak Threshing Floor
475sf of extremely wide and thick oak threshing floor. This is another rare find from PA because of its width and condition.Cost: (batch #448) 475sf @ $60sf, whole batch only, $28,500.
Click for More
New Vintage, Original Surface Chestnut Flooring
360sf of original surface chestnut flooring. Some of the best I’ve seen. It is from Pa, which is a rare find. It is very high quality, ~1” thick and flat.Cost: (batch #446) $35sf, whole batch only, $12,600.
Click for More
New Vintage, Super Wide, Original, Hand-planed White Pine Flooring
550sf (+ shorts n/c) of super wide, hand-planned and foot worn white pine from the second floor of the same Norwalk, CT house.Cost: (#445) 550sf @ $30sf, whole batch only, $16,500.
Click for More
Sold Vintage, Wide, Original White Pine Attic Flooring
1300sf (+50sf shorts n/c) of very wide, white pine attic flooring from two different sources, but nearly identical. This material is straight sawn and only slightly foot worn.Cost: (#444) SOLD
Click for More
Vintage, Wide, Red Pine Original Flooring
150sf of very wide, smooth attic Red Pine (aka Hard Pine). A small batch of pristine antique flooring perfect for a bar, bathroom or wine cellar.Cost: (batch #443) 150sf, whole batch only, $6,000
Click for More
SUPER Wide, Original Surface, Oak Attic Flooring
575sf (+) of super wide, antique OAK flooring. 400sf comes from a 1740’s CT salt box attic and 175sf is from a CT colonial attic of similar age and look that I had tucked away.Cost: (batch #442) 575sf, whole batch only, $23,000.
Click for More
Wide, Original Surface Footworn White Pine Flooring
180sf of dry goods store floor. This flooring has a unique, heavy footwear pattern with thinly worn ‘saddles’ about 2’ in width creating three isles and perhaps a shelf area in-between.Cost: (batch #441) 180sf @ $20sf, whole batch only, $3600.
Click for More
Sold Super Wide, Original Surface, Attic White Pine Flooring
88sf of super wide, short, foot worn, 18C White Pine flooring. Perfect for a pantry or wine cellar. Widths of 16” to 23” and lengths of 5’-9’.Cost: (batch #440) SOLD
Click for More
Wide, Original Surface, Attic White Pine Flooring
300sf of wide, antique white pine from an Epson, NH attic. Very lightly foot worn (prominent saw marks) and could use a good buffing for a rustic floor. Most board are a proud 1”.Cost: (batch #439) 300sf @ $20sf, whole batch only, $6,000
Click for More
Sold Circular Sawn Antique Pine Hay Loft Flooring
Circular sawn hay loft hard pine flooring. This flooring is rather clean and has been nicely burnished from the bales of hay being moved around on it over the years.Cost: (batch #420) SOLD
Click for More
Wide Plank, Antique, Original Surface Chestnut flooring
375sf of original surface, proud 1” thick, antique chestnut flooring with a reddish-brown wash on one section and another section that has just a few spots of paint. Widths of 7” to 15” and most lengths of 14.5’ to 15’ long, plus some shorts.Cost: (batch #430) 375sf @ $25sf, whole batch only, $9,375.
Click for More
Wide Plank, Antique, Original Surface Oak Flooring
260sf of early 19C., wide plank, circular sawn oak. Many are just under 12’ long and about 15% shorts (26”). Widths approximately 6” to 16” and lengths from 9’6” to 11’9” plus the shorts. About 210sf are 9’6” and 11’9”. Nominally 7/8” to 1” thick. Perfect for buffing to smooth high points of saw marks but leave them as a prominent feature.Cost: (batch #425) 260sf @ $25, whole batch only, $6,500.
Click for More
Wide Plank, Antique, Sand Grade White Pine
~500sf of wide plank, antique painted and mostly unpainted white pine flooring and wall board. This is ‘sand grade’ material and will be a nice, sanded white pine floor once finished.Cost: (batch #428) Pick what you want with 200sf minimum. $10sf.
Click for More
Wide Plank Antique Red Oak Flooring
250sf of mostly clear, red oak with a thin, tight layer of early bluish-green paint.Cost: (batch #332) 250sf @ $25sf, whole batch only, $6,250.
Click for More
Sold Wide, Original Surface, Foot Worn, Numbered, White Pine Flooring
Spectacular 1,400sf+ of original surface, foot worn, numbered, wide, long, antique Eastern White pine flooring. A fabulous find and a long time in the making. This came from the Chichester, NH meeting house which dates to the 1770’s, but I think the original floor wore out and this floor was put in during the mid-1800’s. It is numbered so the footwear matches the sister boards.Cost: (batch #438) SOLD
Click for More
Sold Wide Plank, 18C, Original Surface, Painted White Pine Flooring
150sf of 18C, ship-lapped, original surface, painted, antique white pine. Widths of ~10” to 16” and lengths of ~14’ to 16’. The flooring could be used ‘as is’ or painted. Because of the condition of the original surface, this floor should not be sanded. The original surface contours would show through the paint.Cost: (batch #432) SOLD
Click for More
Sold Wide Plank, Antique, Dry Surface Red Pine Flooring
590sf of long, wide and thick, hand planed and foot worn 18C Red Pine flooring from South Windsor, CT and a similar thickness batch from MA. The flooring is a proud 1”+/- and very heavy and dense. The flooring should be sanded and buffed to bring out the great Red Pine colors. Widths of 7” to 15” and most length of 12’ to 17’ with a few shorts and extra material for patching. As with all my floors, boards will need to be edged and trimmed before installation.Cost: (batch #431) SOLD
Click for More


