Well stone #12

This is a two piece (cracked) well stone that was broken many years ago. It was purchased from a house in Woodstock, CT. This could be a great landscaping piece or built into a stone deck. It measures 4' x 6' with a 19" diameter hole. Cost: $750

Well Stone #10

This is a special stone because it is dated and initialed. The date looks to be 1771 and the initials are CEC. While you can never be sure the date was carved at that time, there is no indication that it wasn't. The well stone was purchased in 2003 from Wayne Ayers and came from [...]

Granite Post Set #10

Very large scale pair of matched, hip-roof, granite posts. Would be used to flank a large gated entry way and to terminate stone walls on either side. They measure 15" x 15" x 10'+ in total length. The portion that is finished and will be proud of the ground level is 6'-3" tall. This is [...]

Grind Stone #2

Huge grind stone from somewhere in CT. It measures a whopping 6' in diameter and 12" thick. Square hole is 5" x 5". Would make a great ornamental stone or as a center feature built into the deck of a stone patio. Cost: $4,500

Mill Stone #8

Large mill stone from Mansfield, CT. Fantastic hash marks and lichen growth. Measures 4'-3" in diameter x 9" thick. The hole is 9" in diameter. Great garden ornament or it could also be built into a stone wall, deck or walkway. Cost: $5,000

Mill Stone #7

Large mill stone from Phoenixville, CT. Nicely worn and somewhat more primitive than the others here. It measures 4'-3" in diameter x 6" thick. The hole is 8" in diameter. Great garden ornament or it could also be built into a stone wall, deck or walkway. Cost: $3,000

Stone Wall End Caps #2

This matching pair of 'hip-roof' cap-stones from Stafford Springs Motor Speedway, c.1916. The tooled granite has '1916' boldly etched into one side of one stone. Stones measure 35" x 35" and approximately 12" tall to peak. The face of the stones is approximately 6" wide.  This pair would be perfect to top off the ends [...]

Go to Top