Very large scale pair of matched, hip-roof, granite posts. Would be used to flank a large gated entry way and to terminate stone walls on either side. They measure 15" x 15" x 10'+ in total length. The portion that is finished and will be proud of the ground level is 6'-3" tall. This is [...]
This enormous piece of granite was purchase from John Budd of Eastford, CT in 1999. It may have been some type of "anchor" stone for farm machinery. Three 4" diameter holes go all the way through the stone and really defines the look of the piece. The stone measures 32" x 20" x 8' tall. [...]
Huge grind stone from somewhere in CT. It measures a whopping 6' in diameter and 12" thick. Square hole is 5" x 5". Would make a great ornamental stone or as a center feature built into the deck of a stone patio. Cost: $4,500
Large mill stone from Mansfield, CT. Fantastic hash marks and lichen growth. Measures 4'-3" in diameter x 9" thick. The hole is 9" in diameter. Great garden ornament or it could also be built into a stone wall, deck or walkway. Cost: $5,000
Large mill stone from Phoenixville, CT. Nicely worn and somewhat more primitive than the others here. It measures 4'-3" in diameter x 6" thick. The hole is 8" in diameter. Great garden ornament or it could also be built into a stone wall, deck or walkway. Cost: $3,000
Large tether stone with embedded iron bar. The stone measures 42" x 24" x 6" thick. The iron rod is 28" long. Cost: $325
A rare, primitive and early mortar stone in great condition. Measures approximately 28" in diameter and 6" thick. Cost: $950
This matching pair of 'hip-roof' cap-stones from Stafford Springs Motor Speedway, c.1916. The tooled granite has '1916' boldly etched into one side of one stone. Stones measure 35" x 35" and approximately 12" tall to peak. The face of the stones is approximately 6" wide. This pair would be perfect to top off the ends [...]
