This chestnut tabletop is ready for a base. You can order many different styles of custom bases from Tablelegs.com for about $500. It was made from two 17″ wide chestnut wall planks that have been hand planed, patched and defects filled with resin. It slightly undulates from one side to the other because the boards were used crown up and were hand planed vs. being sent through an electric planer (They are not perfectly flat). The table measures 34″ wide x 7’6″ long x approximately 1.25″+ thick depending on where measured.
Cost: $950, was $1,800 (base not included)